MaddMacs is an authorized dealer of
Click on logo to view and/or purchase
|
|
|
SW22 Victory®
1. Thread barrel 1/2-28TPI; move front sight back. Comes with free knurled thread protector. - $145 (return shipping not included). 11 degree target crown add $20. Shorten to any length add $25. Click here to view photos.
*The SW22 Victory® barrel is made from 410 Stainless Steel that has been heat treated and extremely hard to machine. This is the reason for the increased cost to thread, crown and/or cut.
2. Install MaddMacs Slide Racker. - $125 (includes racker and installation, does not include return shipping). **NOTE** This is a permanent modification to your bolt. Racker will be permanent. Click here to view.
3. Install MaddMacs extended magazine release. - $50 (includes oversized button, does not include return shipping). **NOTE** This is a permanent modification to your magazine release. Button is permanent. Click here to view.
5. Target Trigger Job... under 2lbs - $125 (does not include return shipping) Trigger job: The internals are removed so the hammer, sear and trigger disconnect can be hand polished to a mirror finish. The hammer spring is reduced. Trigger is set before it ships with a crisp break of 2lbs 4oz. Must send complete frame and mainspring housing. *Must ship UPS or FedEx*
6. Cerakote - prices shown do not include return shipping
a. solid color complete pistol - $250
b. two-tone color (upper/lower) - $275
c. upper only - $140
d. lower only - $120
For other parts to be Cerakoted not listed here, email Jason at jajones@maddmacsprecisiontactical.com for quote.
7. DuraCoat - prices shown do not include return shipping
a. solid color complete pistol - $175
b. two-tone color (upper/lower) - $200
c. upper only - $100
d. lower only - $85
e. grip panels only - $45
For other parts to be DuraCoated not listed here, email Jason at jajones@maddmacsprecisiontactical.com for quote.
9. Install VC Edge Extractor -$30 (includes extractor and installation, does not include return shipping).
10. Pin & Weld Comp - $75 (return shipping and comp not included). This service requires upper to be sent to MaddMacs Precision Tactical. This is a permanent modification which involves attaching, pinning and welding your choice of comp to your threaded muzzle.
MaddMacs Custom SW22 Victory® built from your supplied pistol:
-Standard Model: Your supplied SW22 Victory® will receive the following upgrades:
-Deluxe Model: Your supplied SW22 Victory® will receive the following upgrades:
-Deluxe Target Model - Your supplied SW22 Victory® will receive the following upgrades:
-Competition Model - Your supplied SW22 Victory® will receive the following upgrades:
Ship your complete pistol or parts to be serviced to:
MaddMacs Precision Tactical, LLC
2401 Beaverdale Rd NE
Dalton, GA 30721
Include your name, address, email address and phone number in the package along with a description of what work you are wanting done.
PLEASE READ shipping instructions before shipping. Click Here.
For any additional information or to ask any questions, please contact Jason at jajones@maddmacsprecisiontactical.com
*The SW22 Victory® barrel is made from 410 Stainless Steel that has been heat treated and extremely hard to machine. This is the reason for the increased cost to thread, crown and/or cut.
2. Install MaddMacs Slide Racker. - $125 (includes racker and installation, does not include return shipping). **NOTE** This is a permanent modification to your bolt. Racker will be permanent. Click here to view.
3. Install MaddMacs extended magazine release. - $50 (includes oversized button, does not include return shipping). **NOTE** This is a permanent modification to your magazine release. Button is permanent. Click here to view.
5. Target Trigger Job... under 2lbs - $125 (does not include return shipping) Trigger job: The internals are removed so the hammer, sear and trigger disconnect can be hand polished to a mirror finish. The hammer spring is reduced. Trigger is set before it ships with a crisp break of 2lbs 4oz. Must send complete frame and mainspring housing. *Must ship UPS or FedEx*
6. Cerakote - prices shown do not include return shipping
a. solid color complete pistol - $250
b. two-tone color (upper/lower) - $275
c. upper only - $140
d. lower only - $120
For other parts to be Cerakoted not listed here, email Jason at jajones@maddmacsprecisiontactical.com for quote.
7. DuraCoat - prices shown do not include return shipping
a. solid color complete pistol - $175
b. two-tone color (upper/lower) - $200
c. upper only - $100
d. lower only - $85
e. grip panels only - $45
For other parts to be DuraCoated not listed here, email Jason at jajones@maddmacsprecisiontactical.com for quote.
9. Install VC Edge Extractor -$30 (includes extractor and installation, does not include return shipping).
10. Pin & Weld Comp - $75 (return shipping and comp not included). This service requires upper to be sent to MaddMacs Precision Tactical. This is a permanent modification which involves attaching, pinning and welding your choice of comp to your threaded muzzle.
MaddMacs Custom SW22 Victory® built from your supplied pistol:
-Standard Model: Your supplied SW22 Victory® will receive the following upgrades:
- Extended Magazine button installed. Color options: Satin Stainless or Black Oxide
- Viton® O-Ring installed on takedown screw
- Trigger job: The internals are removed so the hammer, sear and trigger disconnect can be hand polished to a mirror finish. The hammer spring is reduced. Trigger is set before it ships with a crisp break of 2lbs 4oz.
- Magazine disconnect is removed
- Volquartsen Exact Edge Extractor installed
-Deluxe Model: Your supplied SW22 Victory® will receive the following upgrades:
- Extended Magazine button installed. Color options: Satin Stainless or Black Oxide
- Viton® O-Ring installed on takedown screw
- Trigger job: The internals are removed so the hammer, sear and trigger disconnect can be hand polished to a mirror finish. The hammer spring is reduced. Trigger is set before it ships with a crisp break of 2lbs 4oz.
- Magazine disconnect is removed
- Volquartsen Exact Edge Extractor installed
- Barrel threaded at ½-28TPI with 11 degree target crown
- Knurled Thread Protector. Color options: Satin Stainless or Black Oxide
- MaddMacs Compensator #SW22VIC001. Color Options: Satin Stainless or Black Oxide
-Deluxe Target Model - Your supplied SW22 Victory® will receive the following upgrades:
- Extended Magazine button installed. Color options: Satin Stainless or Black Oxide
- Trigger job: The internals are removed so the hammer, sear and trigger disconnect can be hand polished to a mirror finish. The hammer spring is reduced. Trigger is set before it ships with a crisp break of 2lbs 4oz.
- Viton® O-Ring installed on takedown screw
- Magazine disconnect is removed
- Volquartsen Exact Edge Extractor installed
- Barrel threaded at ½-28TPI with 11 degree target crown
- Knurled Thread Protector. Color options: Satin Stainless or Black Oxide
- MaddMacs Compensator #SW22VIC001 installed. Color Options: Satin Stainless or Black Oxide
- MaddMacs SW22 Victory® Base #MPTSWVB installed. Color options: Satin Stainless or Black Oxide
- Burris FFIII™ 3MOA installed
- MaddMacs SW22 Victory® Racker #MPTSWVRK installed. Color options: Satin Stainless or Black Oxide
- Stainless TORX® Grip Screws installed
-Competition Model - Your supplied SW22 Victory® will receive the following upgrades:
- Extended Magazine button installed. Color options: Satin Stainless or Black Oxide
- Trigger job: The internals are removed so the hammer, sear and trigger disconnect can be hand polished to a mirror finish. The hammer spring is reduced. Trigger is set before it ships with a crisp break of 2lbs 4oz.
- Viton® O-Ring installed on takedown screw
- Magazine disconnect is removed
- Volquartsen Exact Edge Extractor installed
- Custom Stainless Steel top ported compensator installed. Polished to match VC barrel
- MaddMacs SW22 Victory® Base #MPTSWVB installed. Color options: Satin Stainless or Black Oxide
- Burris FFIII™ 3MOA installed
- MaddMacs SW22 Victory® Racker #MPTSWVRK installed. Color options: Satin Stainless or Black Oxide
- Stainless TORX® Grip Screws installed
- Volquartsen Carbon Fiber Lightweight Barrel
Ship your complete pistol or parts to be serviced to:
MaddMacs Precision Tactical, LLC
2401 Beaverdale Rd NE
Dalton, GA 30721
Include your name, address, email address and phone number in the package along with a description of what work you are wanting done.
PLEASE READ shipping instructions before shipping. Click Here.
For any additional information or to ask any questions, please contact Jason at jajones@maddmacsprecisiontactical.com