MaddMacs is an authorized dealer of
Click on logo to view and/or purchase
|
|
|
Gunsmithing services for the Ruger® 22/45™ Target
1. Thread barrel 1/2-28TPI; move front sight back. Comes with free knurled thread protector. - $140 (return shipping not included). 11 degree target crown add $25. Cut to any length add $20. Click here to view pictures and purchase.
2. Install TacSol picatinny rail. Requires modification to rail. Includes the rail and re-finishing once modified. - $75 (return shipping not included)
3. Install MaddMacs extended bolt knob. - $125 (includes knob, does not include return shipping). **NOTE** This is a permanent modification to your bolt. Knob will be permanent. Click here to view.
4. Install MaddMacs extended magazine release. - $50 (includes oversized button, does not include return shipping). **NOTE** This is a permanent modification to your magazine release. Button is permanent. Click here to view.
5. Target Trigger Job... under 2lbs - $200 (does not include return shipping) Factory trigger bored and tapped for both pre-travel and over-travel. Factory hammer and sear replaced with Volquartsen Target hammer and sear. All internals polished to a mirror finish. Hammer spring power reduced. Includes MaddMacs stainless hammer bushing that replaces the factory magazine disconnect. Must send complete frame and mainspring housing. *Can ship USPS Priority Mail*
6. Cerakote - prices shown do not include return shipping
a. solid color complete pistol - $250
b. two-tone color (upper/lower) - $275
c. upper only - $125
d. lower only - $125
For other parts to be Cerakoted not listed here, email Jason at jajones@maddmacsprecisiontactical.com for quote.
7. DuraCoat - prices shown do not include return shipping
a. solid color complete pistol - $175
b. two-tone color (upper/lower) - $200
c. upper only - $125
d. lower only - $100
e. grip panels only - $30
Click here to view photos of LITE®s DuraCoated by MaddMacs
For other parts to be DuraCoated not listed here, email Jason at jajones@maddmacsprecisiontactical.com for quote.
8. Install for removable grips. - $125 (shipping not included). This service is specifically for those who have the pistol with molded non-removable grip panels. These grips are milled flush with the frame then bored and tapped for grip screw bushings. Bushings and grip screws are included. Click here for to view before and after. Grip panels are not included but can be purchased here. **Send stripped lower only. A $30 charge will be applied to remove all internals and to re-install**
9. Install Volquartsen Accurizing Kit. - $200 (shipping not included). This service includes Volquartsen's Accurizing Kit, MaddMacs stainless hammer bushing, polishing of all internals and installation to your supplied frame.
10. Pin & Weld Comp - $65 (return shipping and comp not included). This service requires upper to be sent to MaddMacs Precision Tactical. This is a permanent modification which involves attaching, pinning and welding your choice of comp to your threaded muzzle.
11. M10149 Sight Install - $275 (return shipping not included). This service is specifically for the Ruger® 22/45 MKIII™ Model 10149. The upper is bored and tapped for a front sight and machined with a 65 degree dovetail cut for the rear sight. Includes a factory adjustable rear sight and front sight installed. Also includes Positive Stop Plug screws for the scope base screw holes. Click here to view photo.
MaddMacs Custom built from your supplied pistol:
-Standard Target Model: Your supplied pistol will have a Target Trigger Job performed, a threaded barrel with the front sight moved, a smooth thread protector (item #2245301) and the magazine safety removed to allow for a smooth magazine drop. $350 (does not include return shipping). Click here to view photos.
-Deluxe Target Model: Your supplied pistol will have the same features as the Standard (above) and will also include a TacSol picatinny rail modified to fit the receiver, a MaddMacs Extended Magazine release, an 11 degree target crown, a MaddMacs compensator (item # 2245019) and Hogue checkered aluminum grips. $525 (does not include return shipping). Click here to view photos.
-Competition Target Model - Your supplied pistol will have the same features as the Standard and Deluxe and will also inlcude a MaddMacs Extended Bolt knob and Hogue G10 Mascus grips. $750 (does not include return shipping)
Other options:
- two tone DuraCoat finish (colors or your choice) add $200
- C-More RTS red dot installed add $600
- MaddMacs FastFire dovetail mount and FastFire III installed $350
Ship your complete pistol or parts to be serviced to:
MaddMacs Precision Tactical, LLC
2401 Beaverdale Rd NE
Dalton, GA 30721
Include your name, address, email address and phone number in the package along with a description of what work you are wanting done.
PLEASE READ shipping instructions before shipping. Click Here.
***NOTE*** You can ship your frame (lower) via USPS Priority Mail. DO NOT ship your barrel (upper) USPS .
For any additional information or to ask any questions, please contact Jason at jajones@maddmacsprecisiontactical.com
2. Install TacSol picatinny rail. Requires modification to rail. Includes the rail and re-finishing once modified. - $75 (return shipping not included)
3. Install MaddMacs extended bolt knob. - $125 (includes knob, does not include return shipping). **NOTE** This is a permanent modification to your bolt. Knob will be permanent. Click here to view.
4. Install MaddMacs extended magazine release. - $50 (includes oversized button, does not include return shipping). **NOTE** This is a permanent modification to your magazine release. Button is permanent. Click here to view.
5. Target Trigger Job... under 2lbs - $200 (does not include return shipping) Factory trigger bored and tapped for both pre-travel and over-travel. Factory hammer and sear replaced with Volquartsen Target hammer and sear. All internals polished to a mirror finish. Hammer spring power reduced. Includes MaddMacs stainless hammer bushing that replaces the factory magazine disconnect. Must send complete frame and mainspring housing. *Can ship USPS Priority Mail*
6. Cerakote - prices shown do not include return shipping
a. solid color complete pistol - $250
b. two-tone color (upper/lower) - $275
c. upper only - $125
d. lower only - $125
For other parts to be Cerakoted not listed here, email Jason at jajones@maddmacsprecisiontactical.com for quote.
7. DuraCoat - prices shown do not include return shipping
a. solid color complete pistol - $175
b. two-tone color (upper/lower) - $200
c. upper only - $125
d. lower only - $100
e. grip panels only - $30
Click here to view photos of LITE®s DuraCoated by MaddMacs
For other parts to be DuraCoated not listed here, email Jason at jajones@maddmacsprecisiontactical.com for quote.
8. Install for removable grips. - $125 (shipping not included). This service is specifically for those who have the pistol with molded non-removable grip panels. These grips are milled flush with the frame then bored and tapped for grip screw bushings. Bushings and grip screws are included. Click here for to view before and after. Grip panels are not included but can be purchased here. **Send stripped lower only. A $30 charge will be applied to remove all internals and to re-install**
9. Install Volquartsen Accurizing Kit. - $200 (shipping not included). This service includes Volquartsen's Accurizing Kit, MaddMacs stainless hammer bushing, polishing of all internals and installation to your supplied frame.
10. Pin & Weld Comp - $65 (return shipping and comp not included). This service requires upper to be sent to MaddMacs Precision Tactical. This is a permanent modification which involves attaching, pinning and welding your choice of comp to your threaded muzzle.
11. M10149 Sight Install - $275 (return shipping not included). This service is specifically for the Ruger® 22/45 MKIII™ Model 10149. The upper is bored and tapped for a front sight and machined with a 65 degree dovetail cut for the rear sight. Includes a factory adjustable rear sight and front sight installed. Also includes Positive Stop Plug screws for the scope base screw holes. Click here to view photo.
MaddMacs Custom built from your supplied pistol:
-Standard Target Model: Your supplied pistol will have a Target Trigger Job performed, a threaded barrel with the front sight moved, a smooth thread protector (item #2245301) and the magazine safety removed to allow for a smooth magazine drop. $350 (does not include return shipping). Click here to view photos.
-Deluxe Target Model: Your supplied pistol will have the same features as the Standard (above) and will also include a TacSol picatinny rail modified to fit the receiver, a MaddMacs Extended Magazine release, an 11 degree target crown, a MaddMacs compensator (item # 2245019) and Hogue checkered aluminum grips. $525 (does not include return shipping). Click here to view photos.
-Competition Target Model - Your supplied pistol will have the same features as the Standard and Deluxe and will also inlcude a MaddMacs Extended Bolt knob and Hogue G10 Mascus grips. $750 (does not include return shipping)
Other options:
- two tone DuraCoat finish (colors or your choice) add $200
- C-More RTS red dot installed add $600
- MaddMacs FastFire dovetail mount and FastFire III installed $350
Ship your complete pistol or parts to be serviced to:
MaddMacs Precision Tactical, LLC
2401 Beaverdale Rd NE
Dalton, GA 30721
Include your name, address, email address and phone number in the package along with a description of what work you are wanting done.
PLEASE READ shipping instructions before shipping. Click Here.
***NOTE*** You can ship your frame (lower) via USPS Priority Mail. DO NOT ship your barrel (upper) USPS .
For any additional information or to ask any questions, please contact Jason at jajones@maddmacsprecisiontactical.com