MaddMacs XBAR and XBAR/IB Accessories
MaddMacs XBAR Center Base 2.0 #MPTXBARCB
The new MaddMacs XBAR Center Base 2.0 is designed specifically for the standard XBAR. This base has the exact features of the best selling MaddMacs Center Base 2.0 with the exception of oval type ejection port cut out found on the Ruger® MK Series uppers. The ejection port cut out on this base is square to macth the port of the XBAR. Extremely low, mounting your red dot .0825” above the receiver. Machined from 6061-T6 aluminum and DuraCoated in Black Oxide.
Models available:
FFIII®/ Vortex Venom®, Trijicon® RMR, Leupold DeltaPoint Pro®, Vortex® Viper, Vortex® Razor, Sig Romeo® and C-More RTS2
***Choose a specific model after clicking Buy Now***
$58.95
Models available:
FFIII®/ Vortex Venom®, Trijicon® RMR, Leupold DeltaPoint Pro®, Vortex® Viper, Vortex® Razor, Sig Romeo® and C-More RTS2
***Choose a specific model after clicking Buy Now***
$58.95
MaddMacs XBAR NDT Base 2.0 #MPTXNDT
The new MaddMacs XBAR NDT Base 2.0 (Non DoveTail) base for the FFIII/ Venom is designed specifically for the standard XBAR with VC TL rear sight and is the ONLY base that will properly fit. Under the VC TL rear sight, there is a “4th” 6-48 tapped hole. This will allow the XBAR NDT Base 2.0 to be mounted to your new XBAR without the use of a threaded dovetail piece. Machined from 6061-T6 aluminum and DuraCoated in Black Oxide. Extremely low, mounting your FFIII®/ Vortex Venom® .0825” from the top of the receiver. Alignment pins for easy installation. All hardware and key are included.
***This will NOT fit the Ruger® MK Series uppers or the Tactical Solution PacLite uppers. If you purchase this base for your Ruger® MK Series or TS PacLite upper, there will be NO refunds or exchanges.***
$81.95
***This will NOT fit the Ruger® MK Series uppers or the Tactical Solution PacLite uppers. If you purchase this base for your Ruger® MK Series or TS PacLite upper, there will be NO refunds or exchanges.***
$81.95
MaddMacs XBAR NDT RMR® Base 2.0 #MPTXRMR
The new MaddMacs XBAR NDT RMR Base 2.0 (Non DoveTail) base is designed specifically for the standard XBAR with VC TL rear sight and is the ONLY base that will properly fit. Under the VC TL rear sight, there is a “4th” 6-48 tapped hole. This will allow the XBAR NDT Base 2.0 to be mounted to your new XBAR without the use of a threaded dovetail piece. Machined from 6061-T6 aluminum and DuraCoated in Black Oxide. Extremely low, mounting your Trijicon® RMR .0825” from the top of the receiver. Alignment pins for easy installation. All hardware and key are included.
***This will NOT fit the Ruger® MK Series uppers or the Tactical Solution PacLite uppers. If you purchase this base for your Ruger® MK Series or TS PacLite upper, there will be NO refunds or exchanges.***
$88.95
***This will NOT fit the Ruger® MK Series uppers or the Tactical Solution PacLite uppers. If you purchase this base for your Ruger® MK Series or TS PacLite upper, there will be NO refunds or exchanges.***
$88.95
MaddMacs XBAR NDT DeltaPoint Pro® Base 2.0 #MPTXDPP
The new MaddMacs XBAR NDT DeltaPoint Pro® Base 2.0 (Non DoveTail) base is designed specifically for the standard XBAR with VC TL rear sight and is the ONLY base that will properly fit. Under the VC TL rear sight, there is a “4th” 6-48 tapped hole. This will allow the XBAR NDT Base 2.0 to be mounted to your new XBAR without the use of a threaded dovetail piece. Machined from 6061-T6 aluminum and DuraCoated in Black Oxide. Extremely low, mounting your Leupold DeltaPoint Pro® .0825” from the top of the receiver. Alignment pins for easy installation. All hardware and key are included.
***This will NOT fit the Ruger® MK Series uppers or the Tactical Solution PacLite uppers. If you purchase this base for your Ruger® MK Series or TS PacLite upper, there will be NO refunds or exchanges.***
$88.95
***This will NOT fit the Ruger® MK Series uppers or the Tactical Solution PacLite uppers. If you purchase this base for your Ruger® MK Series or TS PacLite upper, there will be NO refunds or exchanges.***
$88.95
MADDMACS XBAR SR RAIL #mptxBSR
|
The new XBAR SR rail is a full length top rail deisgned for the new XBAR SR upper with no sights. However, this rail will fit any XBAR with TL rear sight utilizing the "4th hole" located under the rear sight. Machined from 6061-T6 aluminum and DuraCoated in Black Oxide. Much lower than any other aftermarket rail with the square ejection port cut out to match the XBAR.
*** This will NOT fit the MaddMacs XBAR/iB*** |
$51.95
MaddMacs XBAR Accessory Rail #MPTXAR
The XBAR, XBAR/iB, XBAR 10 and XBAR/iB 10 are drilled and tapped on the underside of the barrel to accept this rail. Machined from 6061-T6 aluminum to the exact specs of the 1913 picatinny rail to accept any aftermarket light/laser. DuraCoated in Black Oxide. All hardware and key are included.
***Will fit any XBAR***
$41.95
***Will fit any XBAR***
$41.95
maddmacs xBAR 10 FULL LENGTH ACCESSORY RAIL #mPTXFAR
The XBAR 10 and XBAR/iB 10 are drilled and tapped on the underside of the barrel to accept this rail. The full length rail measures 7.675". Machined from 6061-T6 aluminum to the exact specs of the 1913 picatinny rail to accept any aftermarket light/laser. DuraCoated in Black Oxide. All hardware and key are included.
***Will ONLY fit XBAR 10 & XBAR/iB 10***
$84.95
***Will ONLY fit XBAR 10 & XBAR/iB 10***
$84.95
MaddMacs XBAR Scope Rail #MPTXSR
This picatinny rail is specifically designed to mount on the top of the standard XBAR and XBAR 10. Machined from 6061-T6 aluminum and DuraCoated in Black Oxide. Much lower than any other aftermarket rail with the square ejection port cut out to match the XBAR.
*** This will NOT fit the MaddMacs XBAR/iB***
$42.95
*** This will NOT fit the MaddMacs XBAR/iB***
$42.95