holosun 407c-X2 w/maddmacs center Base #mpth407ccB
HoloSun™ 407C-X2 reflex sight 2MOA mounted on the new MaddMacs Center Base 2.0. Mount secures to your pistol in the first two scope base holes over ejection port scope. Extremely low, mounting the 407C less than .0825" high. Undercut for ejection port. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide.
Will fit all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite upper.
Save $50 when you buy this as a combo!
Comes with installation instructions, hardware & Holosun 407C red dot
Scroll down for base only
$289.95
Will fit all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite upper.
Save $50 when you buy this as a combo!
Comes with installation instructions, hardware & Holosun 407C red dot
Scroll down for base only
$289.95
HOLOSUN 407C-X2 W/MADDMACS DT BASE #MPTH407CDT
HoloSun™ 407C-x2 2MOA mounted on MaddMacs DT Base 2.0. Mount secures to your pistol in the rear sight dovetail and first scope base screw hole. Extremely low, mounting the 407C less than .0825" high. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide.
Will fit all Ruger® MK Series pistols
Comes with installation instructions, hardware & Holosun 407C red dot
Scroll down for base only
Save $60 when you buy this as a combo!
$319.95
Will fit all Ruger® MK Series pistols
Comes with installation instructions, hardware & Holosun 407C red dot
Scroll down for base only
Save $60 when you buy this as a combo!
$319.95
Holosun 407k-x2 w/maddmacs center BASE #MPTH407KCB
HoloSun™ 407-x2 reflex sight 6MOA mounted on the new MaddMacs Center Base 2.0. Mount secures to your pistol in the first two scope base holes over ejection port scope. Extremely low, mounting the 407K less than .0825" high. Undercut for ejection port. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide.
Will fit all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite upper.
Save $50 when you buy this as a combo!
Comes with installation instructions, hardware & Holosun 407K red dot
Scroll down for base only
$254.95
Will fit all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite upper.
Save $50 when you buy this as a combo!
Comes with installation instructions, hardware & Holosun 407K red dot
Scroll down for base only
$254.95
HOLOSUN™ 407K-X2 W/MADDMACS DT BASE #MPTH407KDT
HoloSun™ 407K-x2 6MOA mounted on MaddMacs DT Base 2.0. Mount secures to your pistol in the rear sight dovetail and first scope base screw hole. Extremely low, mounting the 407K less than .0825" high. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide.
Will fit all Ruger® MK Series pistols
Comes with installation instructions, hardware & Holosun 407K red dot
Scroll down for base only
Save $60 when you buy this as a combo!
$289.95
Will fit all Ruger® MK Series pistols
Comes with installation instructions, hardware & Holosun 407K red dot
Scroll down for base only
Save $60 when you buy this as a combo!
$289.95
MADDMACS CENTER BASE 2.0
For the HoloSun 407C/507C
The new MaddMacs RMR™ Center Base 2.0 for the Ruger® MK Series pistols is a re-designed version of the original MaddMacs RMR™ Center Base with more features. First, the 2.0 has alignment pins machined into the base to accept the HoloSun 407C/507C red dots. This will take all the guess work out aligning your red dot to the base and will help keep it secure. As with original, the 2.0 is machined to perfectly fit flush with the HoloSun but has been shortened some in it's overall length and still undercut for the ejection port. The T10 Torx screws used for mounting the base have been machined with a thinner head allowing the the 2.0 to be thinnest base on the market. The new 2.0 mounts your red dot .0825" above the receiver!
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite™ upper.
*****This base fits your HS 407C/507C*****
$65.95
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite™ upper.
*****This base fits your HS 407C/507C*****
$65.95
Maddmacs dovetail BASE 2.0
For the HoloSun 407C/507C
The new MaddMacs RMR Dovetail Base 2.0 for the Ruger® MK Series pistols is a re-designed version of the original MaddMacs RMR DT Base with more features. First, the 2.0 has alignment pins machined into the base to accept the HolosSun 407C/507C red dots. This will take all the guess work out aligning your red dot to the base and will help keep it secure. As with original, the 2.0 is machined to perfectly fit flush with the HoloSun™ but has been shortened some in it's overall length and still undercut for the ejection port. Mount secures to your pistol in the rear sight dovetail and first scope base screw hole. The T10 Torx screws used for mounting the base have been machined with a thinner head allowing the 2.0 to be thinnest base on the market. The new 2.0 mounts your red dot .0825" above the receiver!
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
*****This base fits your HS 407C/507C*****
$95.95
maddmacs center Base 2.0
For the HoloSun 407K/507K
The new MaddMacs Center Base 2.0 for the Ruger® MK Series pistols is a re-designed version of the original MaddMacs Center Base with more features. First, the 2.0 has alignment pins machined into the base to accept the HoloSun 407K/507K red dots. This will take all the guess work out aligning your red dot to the base and will help keep it secure. As with original, the 2.0 is machined to perfectly fit flush with the HoloSun but has been shortened some in it's overall length and still undercut for the ejection port. The T10 Torx screws used for mounting the base have been machined with a thinner head allowing the the 2.0 to be thinnest base on the market. The new 2.0 mounts your red dot .0825" above the receiver!
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite™ upper.
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite™ upper.
$67.95
maddmacs dovetail Base 2.0
For the HoloSun 407K/507K
The new MaddMacs Dovetail Base 2.0 for the Ruger® MK Series pistols is a re-designed version of the original MaddMacs DT Base with more features. First, the 2.0 has alignment pins machined into the base to accept the HoloSun 407K/507K red dots. This will take all the guess work out aligning your red dot to the base and will help keep it secure. As with original, the 2.0 is machined to perfectly fit flush with the HoloSun but has been shortened some in it's overall length.
Mount secures to your pistol in the rear sight dovetail and first scope base screw hole. The T10 Torx screws used for mounting the base have been machined with a thinner head allowing the the 2.0 to be thinnest base on the market. The new 2.0 mounts your red dot .0825" above the receiver!
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
Mount secures to your pistol in the rear sight dovetail and first scope base screw hole. The T10 Torx screws used for mounting the base have been machined with a thinner head allowing the the 2.0 to be thinnest base on the market. The new 2.0 mounts your red dot .0825" above the receiver!
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
$99.95
For Canadian residents wanting to purchase bases listed on this page, contact Aztech Armory at info@aztecharmory.com