maddmacs center base 2.0
The new MaddMacs Center Base 2.0 for the Ruger® MK Series pistols is a re-designed version of the original MaddMacs Center Base with more features. First, the 2.0 has alignment pins machined into the base to accept all Burris FastFire™ III and Vortex Venom® red dots. This will take all the guess work out aligning your red dot to the base and will help keep it secure. As with original, the 2.0 is machined to perfectly fit flush with the FF™III or Venom® but has been shortened some in it's overall length and still undercut for the ejection port. The T10 Torx screws used for mounting the base have been machined with a thinner head allowing the the 2.0 to be thinnest base on the market. The new 2.0 mounts your red dot .0825" above the receiver!
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite™ upper.
$56.95
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite™ upper.
$56.95
maddmacs DT base 2.0 #MPTDTB2.0
|
|
The new MaddMacs Dovetail Base 2.0 for the Ruger® MK Series pistols is a re-designed version of the original MaddMacs DT Base with more features. First, the 2.0 has alignment pins machined into the base to accept all Burris FastFire™ III and Vortex Venom® red dots. This will take all the guess work out aligning your red dot to the base and will help keep it secure. As with original, the 2.0 is machined to perfectly fit flush with the FFIII™ or Venom®. Mount secures to your pistol in the rear sight dovetail and first scope base screw hole. The T10 Torx screws used for mounting the base have been machined with a thinner head allowing the the 2.0 to be thinnest base on the market. The new 2.0 mounts your red dot .0825" above the receiver!
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
$91.95
Made from 6061-T6 aluminum and DuraCoated in Black Oxide.
Easy to install (instructions and hardware included)
Will fit on all Ruger® MK Series pistols
$91.95
modified ffiii™ base #mptmffiiib
Taking a factory Burris FFIII™ base, we removed the huge thumb screw and replaced with a button head screw for installation to your rail. Specifically designed and modified for all you shooters with VC Scorpion uppers and integrated rail. Replacing the thumb screw with the button head, keeps the base narrow and sleek on your Scorpion. This base is not limited to the Scorpion, but will work with any Weaver/picatinny type rail.
Accepts all FFIII™, Vortex Venom™ and Viper™ red dots
Limited supply
$49.95
Accepts all FFIII™, Vortex Venom™ and Viper™ red dots
Limited supply
$49.95
Burris FFIII™ w/ MaddMacs Center Base #MPTBVBs
Burris FastFire™ III red dot 3MOA or 8MOA mounted on the new MaddMacs Center Base 2.0. Mount secures to your pistol in the first two scope base holes over ejection port scope. Extremely low, mounting the FastFire™ less than .0825" high. Undercut for ejection port. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide. Will fit all Ruger® MK Series pistols
Will also fit the Tactical Solutions Pac Lite™ upper.
Comes with installation instructions, hardware & FastFire™
Save $30 when you buy this as a combo!
$289.95
burris fastfire™ iii w/10/22 base #mpt1022b35
Burris FFIII™ with MaddMacs base for the Ruger 10/22®. Finally, a FFIII™/Vortex Venom® base for the Ruger 10/22® that doesn't require a rail. Made from 6061 aluminum and DuraCoated in Black Oxide, this base is less than 1/8" high and mounts to the first two scope base holes of your receiver.
After clicking Buy Now, you can choose where you want the base placed on your receiver. The rear two base hole selection will place the red dot closer to your eye as pictured above. The front two base hole selection will place the red dot forward towards the muzzle.
***Fits only those 10/22®s that have a smooth top receiver**
Includes FFIII 3MOA, instructions, hardware and key
Save $30 when you buy this as a combo package!
Scroll down for base only
$289.95
After clicking Buy Now, you can choose where you want the base placed on your receiver. The rear two base hole selection will place the red dot closer to your eye as pictured above. The front two base hole selection will place the red dot forward towards the muzzle.
***Fits only those 10/22®s that have a smooth top receiver**
Includes FFIII 3MOA, instructions, hardware and key
Save $30 when you buy this as a combo package!
Scroll down for base only
$289.95
Burris FastFire™ III w/ SW22 Victory® maddmacs Base #MPTSWVFFIII
Burris FastFire™ III red dot 3MOA or 8MOA mounted on MaddMacs base for the SW22 Victory®. Mount secures to your pistol by locking into the rear tab and securing to the front screw hole. Extremely low, mounting the FastFire™ less than .13" high. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide or Satin Stainless. Will fit the SW22 Victory ONLY.
Comes with installation instructions, hardware & FastFire™
(option for Vortex Venom® Combo aftering clicking Buy Now)
Scroll down for base only
Save over $35 when you buy this as a combo!
$334.95
Burris FastFire™ III w/MaddMacs CZ455 base #CZ455FIIIB
Burris FastFire™ III red dot 3MOA or 8MOA mounted on MaddMacs CZ455 mount. Mount secures to your rifle on the 11mm receiver dovetail. Extremely low, mounting the FastFire™ less than .14" high. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide. Will fit the CZ455/452 American.
Comes with installation instructions, hardware & FastFire™
Scroll down for base only
Save $30 when you buy this as a combo!
$319.95
Burris FastFire™ III Red Dot 3MOA #MPTBFF3
The next generation of FastFire Red-Dot is here with the introduction of the FastFire™ III. The popular FastFire™ II is even better with upgraded features that include a top mounted battery ((1) CR1632) for easier battery replacement, upgraded windage and elevation adjustments and a power button that provides three manual brightness settings and an automatic brightness setting with low battery indicator. The precision 3 MOA FastFire™ III allows for manual brightness adjustment and includes a protective cover and battery. Just like the rugged FastFire™ II, the FastFire™ III features a Steel body construction for extreme durability and is 100% waterproof. The ultimate CQB sight is perfect for mounting on your pistol, shotgun or rifle. Covered by the Burris 1-year factory warranty. NO mount.
$299.99
$299.99
Burris FastFire™ III Red Dot 3MOA w/mount #MPTBFF3M
The next generation of FastFire™ Red-Dot is here with the introduction of the FastFire™ III. The popular FastFire™ II is even better with upgraded features that include a top mounted battery ((1) CR1632) for easier battery replacement, upgraded windage and elevation adjustments and a power button that provides three manual brightness settings and an automatic brightness setting with low battery indicator. The precision 3 MOA FastFire™ III allows for manual brightness adjustment and includes a protective cover and battery. Just like the rugged FastFire™ II, the FastFire™ III features a Steel body construction for extreme durability and is 100% waterproof. The ultimate CQB sight is perfect for mounting on your pistol, shotgun or rifle. Covered by the Burris 1-year factory warranty. Comes with Picatinny mount.
$319.99
$319.99
Maddmacs ffiii™/vortex venom® base for Ruger 10/22® #mpt1022bv
Finally, a FFIII™/Vortex Venom® base for the Ruger 10/22® that doesn't require a rail. Made from 6061 aluminum and DuraCoated in Black Oxide, this base is less than 1/8" high and mounts to the first two scope base holes of your receiver.
After clicking Buy Now, you can choose where you want the base placed on your receiver. The rear two base hole selection will place the red dot closer to your eye as pictured above. The front two base hole selection will place the red dot forward towards the muzzle.
***Fits only those 10/22®s that have a smooth top receiver**
Includes instructions, hardware and key
$74.95
After clicking Buy Now, you can choose where you want the base placed on your receiver. The rear two base hole selection will place the red dot closer to your eye as pictured above. The front two base hole selection will place the red dot forward towards the muzzle.
***Fits only those 10/22®s that have a smooth top receiver**
Includes instructions, hardware and key
$74.95
Maddmacs FFIII™ Base for sw22 vicTOry® #MPTSWVB
Mount secures to your pistol by locking into the rear tab and securing to the front screw hole. Extremely low, mounting the FastFire™ less than .13" high. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide or Satin Stainless. Will fit the SW22 Victory® ONLY.
Perfect fit for the Vortex Venom®
Comes with installation instructions & hardware
$94.95
Perfect fit for the Vortex Venom®
Comes with installation instructions & hardware
$94.95
maddmacs CZ 455/452 American FFIII™ Base #CZ455FB
Mount secures to your rifle on the 11mm receiver dovetail. Extremely low, mounting the FastFire™ less than .14" high. Easy to install. Made from 6061 aluminum and DuraCoated in Black Oxide. Will fit the CZ455/452 American.
Comes with installation instructions & hardware.
$109.95
Comes with installation instructions & hardware.
$109.95
For Canadian residents wanting to purchase bases listed on this page, contact Aztech Armory at info@aztecharmory.com